|
 With 295 standard COTS [Commercial
Off-The-Shelf] sizes, Hardigg’s line of single-lid, rotomolded transport cases is the
industry leader. We have a case to ship and protect virtually any industrial, commercial,
scientific, or military equipment – computers, tools, electronics, demos, audio,
medical, etc. Hardigg’s reusable single-lid cases are both lightweight and incredibly
rugged, because we use the best polyethylene molding processes – and we engineer them
ourselves. And for your panel-mounted gear, our line of FlangeMount™
cases will suit your transport needs perfectly.
We offer single-lid cases compliant with ATA and MIL-SPEC requirements for your
shipping needs, and you can count on a Hardigg portable transport case to be lightweight
yet heavy-duty, low-maintenance-cost units, and reusable for many years. Every element is
designed to maximize reliability, strength, and protection.
CASE SIZES & COLORS
To best serve any commercial, industrial, or military application, Hardigg offers the
widest choice of single-lid case sizes and colors among all manufacturers of rotationally
molded reusable cases. All case models can be ordered in one of our 13 optional colors.
Case Colors:
Hardigg standard case color (except the ProRack) is Gray 133
(FED-STD-595, #26270). The FED-STD and Pantone chip numbers listed are approximate and may
vary slightly for multiple production runs. For a small additional per-case charge (for
case quantities below 10), the following colors are available: ( ) = Reference
Hardigg # (Reference #)
- 133 Gray (Std) FED-STD 26270
- 137 Olive Drab FED-STD 34096
- 101 Blue [Drk] FED-STD 25052
- 134 Orange FED-STD 12197
- 138 Green [Frst] FED-STD 24052
- 131 Yellow FED-STD 23538
- 250 Tan [Sand] FED-STD 20372
- 132 White FED-STD 27925
- 130 Red FED-STD 21105
- 032 Black FED-STD 27040
- 135 Blue (Light) Pantone 292U
- 136 Yellow Pantone 012U
- 129 Purple Pantone 245U
- 197 Maroon Pantone 202U
To see what models are available, go to the
Single-Lid specifications page. These
cases include all the world-class Hardigg
case features, and are available with many of the options described
below.
FlangeMount Cases
These carrying cases are equipped with a
molded-in shelf to support panel-mounted equipment, and threaded (1/4-20, UNC-2B,
THD)
inserts in the flange allow easy panel fastening. Options include an aluminum mounting
panel as well as a hinged aluminum panel in the case lid. The cases have a
tongue-in-groove parting line which seals tight to keep out humidity, sand, and chemicals.
FlangeMounts™ are available in 18
standard sizes, with either zinc-plated or stainless steel hardware. For a list of sizes
and models, proceed to the FlangeMount™ specifications page.
FEATURES
All Hardigg cases reflect our commitment to utmost quality. What you can expect:
state-of-the-art polyethylene rotomolding, our patented Hardigg Comfort Grip Handle,
molded-in interlocking ribs for stacking strength, recessed hardware throughout; molded-in
tongue-and-groove gasketed parting lines, positive anti-shear locks, and uniform,
molded-in color.
But there’s much more. Go to our
features
page for detailed descriptions of the array of elements that constitute "The Hardigg
Difference."
CASE OPTIONS
Hardigg offers an especially broad range of standard options for our single-lid and
FlangeMount™ shipping cases. These elements, described below, make
our single-lid cases adaptable to a wide variety of transport applications.
Airtight case system. This includes a PRV (pressure relief valve) and gasketing
hardware to safely maintain correct pressure differential.
All-catch. Case hinges are replaced with wing/turn catch-strike pairs, allowing
lid to be completely removed. No charge for this option. [Note: some cases available only
as all-catch.]
Card holder. Metal holder for shipping-card riveted to the exterior of case. Two
sizes: 2-3/8" x 5-3/8" (60 x 136 mm) and 4" x 6" (102 x 152 mm).
Caster sets – removable or fixed. Available in sets of four, these are
attached with rugged mounting hardware or with Hardigg’s FastClip™
mounting plate system.
Edge casters. These rugged caster assemblies are installed along a bottom edge
of a single lid case to permit wheeled movement of the case in a cart-like fashion. Each
heavy-duty caster wheel is in a durable cast aluminum housing uniquely designed to resist
impact and rough handling abuse. Not available on all case sizes.
Foam cushioning. Hardigg cushioning systems are available in polyethylene
(firmer) and polyurethane (softer) foams. Antistatic versions are also available. We offer
foam-filled (with separate layers of 1" or 2" foam) and foam-lined (either
1" or 2" depth) systems. In addition, Hardigg will
customize foam cushioning
systems, with multiple cavities, to provide maximum protection and stability.
Hardigg’s state-of-the-art waterjet foam cutting system provides customers with
precisely manufactured and repeatable cushions – plus fast turnaround.
Forklift provisions/Skid-Runners. The one-piece molded Skid-Runners provide
clearance for forklift tines and pallet jacks.
Handles – Our patented, heavy-duty Hardigg Comfort Grip Handles are the
industry’s easiest to hold. These polyethylene molded handles are available in two
sizes – the Model 75, which is rated to 75 lbs. per handle, and the Model 150, which
is rated to 150 lbs. Model 150 has a 90° stop, while the Model
75 has a non-integral stop. Extra 90°-stop metal handles are also available, mounted to
your request. These are available in zinc-plate yellow-chromate or stainless steel.
Humidity indicator. Indicates 20%, 30%, and 40% relative humidity ranges. Three
part face changes color when inside humidity exceeds the indicated level. As humidity
decreases, the indicator resets for future use. Recommended for airtight cases only.
ID plates. I.A.W. MIL-P-15024, Type H, Style IV, Size 10.4" x 4" x
.020" (102 x 102 x 0.5 mm) thick aluminum, fastener attached to your case. Text font
is News Gothic Bold.
Labels – ATA. Standard ATA container label set complies with Specification
300 Category 1.
Labels – front. To assure that lids are replaced in the proper orientation.
A set of two "front" labels are affixed to the case, one on the base and one on
the lid, in the latchwells.
Labels – standard. Each label set includes: Delicate Unit, Handle with
Care, and Up Arrows.
Lifting/tie-down rings. These welded rings provide hoisting and tie-down
attachment points with 2" diameter clearance for hooks. They’re spring-loaded
and pivot 180° . Available in plated steel or stainless steel.
Locking cable/hasp. Allows the case to be padlocked shut. Cable is
tamper-resistant aircraft steel. [Padlock not included].
Reverse application. The orientation of the case is reversed: the lid becomes
the base and vice versa. The lid has stacking indents instead of stacking ribs. No charge
for this option.
Stainless hardware. Recommended for applications where the standard zinc-plate
or zinc alloy finishes are unsuitable, such as excessive saltwater or chemical
environments.
Stencil – epoxy or polyrollmark. Per MIL-I-43553. Available in black,
white, and yellow, depending on the color of the case itself. One ink color per case.
Valve – fill. Supplied with an inner tube valve core, recommended for
pressurization of case. Housing and cap are black anodized aluminum alloy. Recommended for
use with Purge Valve option.
Valve – purge. Manual Pressure equalization or air relief. Recommended for
use with the Fill Valve option.
|
